Best Bathtub Repair Kit

Kit 14 Aug 2022 10+ Comments Open

1. Replacement Faucet RP25513 RP4993 Spring

Replacement Faucet RP25513 RP4993 Spring

For a tub and shower faucet. The stem or seat may have failed. Extra strength is added by the brass stem and plate. The package includes rubber seats and springs. It works on 888-739-5110 The stem will either be black or beige. The stem will either be black or beige.

Brand: Iyax

👤I ordered these to fix a leaking bathroom faucet. I replaced both of them since I ordered two. Installation is easy with a small wrench and an Allen wrench. The plastic pieces have to be installed differently to operate correctly, so be careful to note how the old parts were situated. The rubber base piece has a small spring orientation. If the chrome nut on the faucet handle isn't turned easily, don't overtighten it. Recommended product.

👤These were easy to replace and came with the seats and springs. I think the real problem with my old faucet was the seats, but these replacements turn without resistance, which we love! I bought 2 - 1 for each cold water on a 2-sink Vanity. I'm thinking about buying a new pair for the hot water side. Since they've only been in use for a week, I can't speak for their longevity, but I can tell you that having brass stems makes them feel more sturdy than the cheaper nylon stems. I have had experience with the latter and would not recommend them. These are very good and come at a reasonable price. Would recommend.

👤I had a leak under my Delta faucet. I decided to fix it one day after ignoring it for a couple years. Shut the water off, then take the old stems to Home Depot. Each stem costs $16. Came home and looked it up on Amazon. The stems cost about fifteen dollars. Returned the ones to Home Depot for $32 and they arrived the next day. It took 10 minutes to install.

👤I bought two sets of these valves for our home. The oldest part that was replaced has been in use for over a year. You can save money by installing it yourself.

👤I was able to fix the leak in my tub. The stems were perfect. They were ripping the washers that sit over the spring when I bought stems made of plastic. We have been free of drips for over three months, where I could only use the shower 3-4 times before the leak came back with manufacturer stems.

👤Purchase this product to fix the leak. It took me 10 minutes to install the product. The old part can be removed and the new one installed without any special tools. The price of parts is a fraction of the cost if I'd called a plumbing professional. This is a good product.

👤I was happy that the replacement stems included the seat and spring, and that it was the right replacement for my Delta faucet. My friend, who is a plumbing professional, replaced the stems in the faucets. No more leaks, that's good. My store used to carry them, but now they are not. Thank goodness for Amazon. I'll order more to keep on hand.

👤So far, so good. The leaking problem was cured by installing these valves. The Delta Victorian faucets were installed in 2004. The valves have been changed 3 times. We will see how long the valves last.

2. RTG Shower Refinishing Paint White

RTG Shower Refinishing Paint White

The attractive low-sheen finish makes shower stalls and tub look new in a day. It's great for house flippers. A fast, easy, economical alternative to bathtub replacement. The finish has good resistance to water temperatures. It is easy to clean and maintain. The surfaces are in good condition. It is very easy to apply. You can recoat in as little as one hour with fast-drying paint. After the final coat, ready to use. The formula has no toxic fumes and is perfect for indoor use. It is easy to clean water and soap. White, Cream, and Light Gray are the colors. The size is Quart. The coverage is 80-100 sq ft per quart. Not for use on porcelain, tile, or ceramic surfaces. Sand or finish won't stick on clean surfaces. Follow instructions with care.

Brand: Rtg Supply Co.

👤I ordered a bathtub refinishing kit last week. It was a disaster because I followed all the directions. I had to remove my tub for the second time in a week. I ordered this paint in white after reading reviews. I wasted a third of my money on the bath tub kit from Bath Works. I used steel wool soap pads to clean the tub after stripping it. I went through the whole box to make sure it was clean. After the tub dried, I sanded it off and then washed it. I made sure the particles were out of the tub. I put a rubber glove on the faucet to keep the water out of the tub. I used alcohol to clean the tub on Sunday. The preparation is very important. I applied a thin coat of paint to the entire tub using a small sponge roller on Sunday. I kept a small brush for drips or touch ups. You won't have drips if you just apply thin coats. 30 minutes between coats was allowed. I did 4 coats. It looked better after each thin coat. The paint looks like scrubbed white porcelain. Some people said it looked blue, but I saw it as a bright white. It looks good. The paint has a faint paint smell. That was a relief after using Bath Works. This is a great paint. Don't put it on too thick. I have a fiberglass tub that had a lot of repair spots and was tan, that's why I have so many coats. I have half a quart left. The paint goes a long way. Very happy.

👤I used this to paint a shower pan. I used 4-5 coats, but I had to cover up several dark stains. The final product is very nice.

👤I used the white to make my shower look better. The results of the foam roller were great. I used 3 coats and the full quart. You could see the roller marks when I was in Italy. As the product dried, it became more opaque and there were no roller marks. We are selling our house and our contractor, painter, and real estate agent all loved it and asked me to share the link. It has an odor but I am certain it will go away. Good stuff. Would buy it again.

👤This product worked well for me. I needed to cover bath crayon drawings that wouldn't come off and also went from almond to white. Don't buy bath crayons. The color is not white. It had a little bit of blue tint. When I checked out, Amazon recommended a brush and a foam roller, but I needed a brush for some areas. The consistency isn't like regular paint, so once you get over expecting it to behave like regular paint, you'll know what to expect and get better results. I had to go back over it with the roller when I put too much on one area. I had to spot-paint to cover up the bath crayon but it blended in well and you couldn't tell that the sections had more paint. I ordered 2 containers because I was doing both the tub and the wall. The photos are from the first container. I am not sure how it will hold up over time. Good luck with this review.

3. Complete Rebuild Faucets Acrylic 39675

Complete Rebuild Faucets Acrylic 39675

This is the best solution for a tub spout. The faucet rebuild kit is ideal to fix a leaking faucet. This kit is designed to fit Delta Delex kitchen and bathroom faucets. The complete pipette and handle kit. The kit includes replacement faucet handles and stems, seats and springs. There are dimensions for hands. The base width and height of these faucet replacement handles are the same. There is a sturdy construction. Handles, stems, seats, and springs are constructed to endure everyday use. The style is classic. The kit is easy to install. The style is classic. The kit is easy to install.

Brand: Danco

👤I had bad luck with Danco products before, but I decided to give it another chance because it's hard to get genuine Delta parts now. The price is the only good thing about this kit. What's good: 1) It's very annoying that handles have a lot of free play on valve stems. There are two more The handle buttons broke after a few days. The buttons don't stay in because the legs that hold them in place cracked. The valve stem bottoms were very hard to turn and barely fit, so I grinded off some extra plastic with my dremel tool. They still don't work well. I will put this kit in the garbage as soon as I can replace the whole thing. I will never buy another Danco product.

👤The process of replacing my knobs is not as easy as they say. If you just do the faucets, a child could replace the knobs at the top with new ones. It's going to be difficult if you want to do the underside compartment. They don't tell you on the product page that you need a wrench to get under the knobs and put the valves on. After I thought about buying a new faucet, I realized that my old one was too old and old-fashioned to really remove the parts. You can get a completely new faucet for just $20-$30. It's easier to put in a new faucet than it is to put in the old one. I don't think this product is bad, it's just not needed. If your whole faucet is old, you should just buy a new one. This would be more for someone who just needs to replace the knobs and knobs if they break. The knobs are nice. They are a good substitute for the original knobs.

👤It was cheap to not get the whole replacement set for the washer set. The fit and finish of the handles is superb, even though they are slightly smaller than Delta originals. You can turn the water on high flow, low flow, or off, not just slowly adjust from off to high. I can't say that is a bad thing or a good thing. Should I need to replace other faucets in my other bathroom, I wouldn't stop buying from them again. I can't speak for longevity, as its only been replaced. I had no issues with fit, only that I had to use my old screws from my delta handles, as the new ones were too long. Not a complaint, just observation. My tub is at least 20 years old, but I'm not sure if it's the original owner. It works, hot and cold both replaced, cost was very modest. Definitely buy again.

👤The old Delex faucet was leaking. The kit did the trick. It acts a little funny when you turn the faucet all the way on. The flow rate is not an issue for me because it changes in a certain position. It was simple to install with a crescent wrench, screw driver, and pliers. The packaging was a bit flimsy, but there was no damage.

4. Shower Countertop Bathtub Porcelain Refinishing

Shower Countertop Bathtub Porcelain Refinishing

The shower handle renovation kit is a genuine Delta repair part. Repairing damaged and cracked bathtubs has never been easier. The porcelain repair kit can be used with any bathtub paint. The repair can be done by one person. No need to replace tiles, no need to hire workers, and so on. Their fiberglass repair kit has good adhesion and resistance to wear. The surface looks renewed with the use of waterproof, leak-proof and durable epoxy. Safe for children and pets and non-toxic and tastelessNo danger and no unpleasant smell. Their bathtub repair kit is easy to use. Glass tub repair kit can work on a wide range of materials. You don't need to add other paint to the porcelain repair kit because it has no trace repair. If you don't like using the bathtub and ceramic tile repair kit, they will give you a full refund. Feel free to contact them if you need help.

Brand: Aibast

👤They exchange gift cards. That's why the reviews were so positive. I don't like that companies are allowed to do that. It's your garden variety, simple 2 part epoxy. Have to mix for a while. I would recommend waiting about 10 minutes after mixing as it's still pretty cloudy. Let it get a little bit stronger.

👤I am very happy with this product. It is easy to use with clear picture directions. I used this product on a standard builder grade metal bathtub that was coated with a porcelain-type white coating. The color match was perfect, but this product is more of a matt finish. If you look closely, you can see that it is not as shiny. I am very happy with the results. About 15 years ago, we purchased a home. The tub started chipping off recently. I think someone dropped a tile while building the home and the builder patched it. The patch was not nice to look at. I looked into another product, but it was too toxic to use. The product was perfect. This did not smell at all to me. It comes with two jars that you mix in equal parts. You don't have to use all of it at once. The wooden stick was used to scoop it out of the jars. A tip is to use a different stick. I used it twice and it hardened in the jar. I used craft sticks the next time. You mix it together on cardboard, use a tool to apply it, and then smooth it with a spatula. You wait for two days. You can apply another coat after waiting. The dark tub still showed through after the first coat. Wait another 24 hours and then sand it. The first thing to do is use a coarse sandpaper. It was easy to figure out that the sandpaper was different than the directions said. The gloves were plastic disposable. You can too if I can do this. It's like icing a cake. It is best to work quickly because the product is a little thick. I tried to get it as smooth as possible so it wouldn't be sanding later. I was hesitant to sand on my bathtub, but I did so gingerly and it came out ok. I'm very happy and proud of my repair.

👤I am so proud of myself for how it turned out. The sink in the master bedroom is cracked and I accidentally poured leftover hair dye in it. I don't want to put in a new one because this bathroom has two sinks and I have to change them. The kit has no smell. You can blend them together even though one is tougher. I add a little bit of brown acrylic to make it match the sink color. I need to borrow an electric drill to buff down some of the curved sections. This is a great alternative to a replacement.

👤I did this repair for 3 days. Application 1 dry, application 2 dry, and application 3 dry. Sanding and polishing. The initial hole is large and was wet inside as this is a shower surround. The hole is the size of a quarter. I used a hair dryer and a paper towel to dry the problem area after cleaning it out. The last picture shows the finished product. It looks like a filling in a tooth. I didn't expect it to match, so that's not an issue for me I don't think you could get a repair system to match your repair area, but maybe you are more skilled than me. I had repaired this spot many times with different brands of repair systems. I have to say that this one has no odor, even though it appears to be two-part epoxies. The earlier repairs lasted about 9 months before they deteriorated. Time will tell on this one. I thought it was a bit thin, but after learning how to work with it, I think it will do better than the others. I think it is a good product. I will update this review if I have issues in the future.

5. REALINN Fiberglass Porcelain Bathroom Countertop

REALINN Fiberglass Porcelain Bathroom Countertop

Impregnating is done with fiberglass. Cracks and holes, scratches,marks, chips anddents can be repaired. Works on any ceramic or porcelain surface. The fiberglass repair kit has good adhesion and resistance to damage. The surface looks renewed with the use of waterproof, leak-proof and durable epoxy. Anyone can complete the repair after a few simple steps. Put the two parts on the scale of 1:1 and mix them together in the bowl. Next, smooth the edges with a scraper. Leave the repaired area for at least 24 hours to allow the mixture to dry. The repair area needs to be polished. The tub repair kit is safe for children and pets. Kit Includes A (100g/ 3.5oz) compound part A and a (100g/ 3.5oz) compound part B are combined. Kit Includes A (100g/ 3.5oz) compound part A and a (100g/ 3.5oz) compound part B are combined.

Brand: Realinn

👤The kit made it easy to fix the hole in my tub. I could have had an exact match if I had added the dye that was included. Highly recommended.

👤It was easy to use, sanded easily, and matched the rest of the tub. Can't tell where the original tub ended.

👤After dropping a porcelain tile on a shower pan, I used this to repair a chip. I was amazed at the results. It was a perfect match. The pan's surface is slightly dimpled for traction, and the sanding part of the process created a small smoother area. You have to get close with a bright light to see.

👤I had a small chip in our bathroom sink and when I was done repairing it, I can't see where the repair was done.

👤The kit is great, but why not make a more realistic shade for the sinks and baths? I have to look for the whole sink.

👤I looked at a lot of products to fix my kitchen sink crack. I decided to buy this product after reading reviews. I was skeptical but after using it I was amazed at how well it worked. You can't tell if there was a crack.

👤It's easy to work with. There is a hole. Looks good.

👤It seems simple, but have not used it yet.

6. MagicEzy Bath Sink REPAIRezy White

MagicEzy Bath Sink REPAIRezy White

There is a kit that includes a cam bearing and cover. Porcelain tub chip repair is a great way to fix small sink cracks, holes in baths, showers, or pitted floor tiles. Many customers don't know where the repair is. Their bathtub repair kit can be used to fix a wide range of issues, from chipped ceramic sinks to a damaged bathtub. A great match for porcelain is the glossy finish that has chips, scratches, and gouges. It can be adjusted to a certain degree. The fiberglass shower repair kit is a good way to fix a cracked fiberglass shower. Don't use the water on the showers until fully dry. There are easy, expert chipped tissue repairs. Apply, level and wipe the surface. The glue can be adjusted to a matt finish. There are easy, expert chipped tissue repairs. Apply, level and wipe the surface. The glue can be adjusted to a matt finish.

Brand: Magicezy

👤Sit for 15 days without using the tub. The product came out after we turned on it. Don't waste your money, the worst didn't last one day.

👤The instructions said it could take over 30 days to cure it. I need to use my bathtub in 30 days. I wanted this to work because it was non-toxic and I didn't have to mix chemicals.

👤The money was wasted. I followed the instructions. It was kept dry for 14 days. I can't return it because it's out of the return window.

👤I bought this several months ago and have to apply it to my kitchen sink. The spot in my sink is between a nickel and a quarter. I think it works better for smaller spots. The sink is 25 years old. It doesn't last very long. It's easy to use, just apply before you leave town.

👤I was surprised at how easy it was to use.

👤The product was easy to use. I purchase white and it is not close to white. It is a silver/grey color. I gave this product a 1 star because it wasn't close to what was advertised.

👤Did not hold up as well as I would have liked.

👤The tub started to peel off.

👤The product is easy to use but it needs to be left to cure for 14 days before it can be used in water. I wouldn't have bought it if it had been advertised. I have a bathroom that I can use for a fortnight.

👤This product was used to repair a shower tray. It has dried to a very poor blue colour. I will have to remove it and try another product.

👤There were scratches on my hand basin. This was more for scratches. It's an absolute waste of money.

👤The product may or may not work. When you order it, they don't tell you that you need to fix it with a hair dryer and not touch it for 14 days. I don't use much for repairing a shower tray. I could do it without the hassle.

👤I am not a do-it-yourselfer, but it is very easy and the steps are written in plain English. It is recommended that you use the sink with water in it for at least 2 weeks, but it is also recommended that you replace the sink for less than the cost of a new one.

7. Ekopel Bathtub Refinishing Kit Reglazing

Ekopel Bathtub Refinishing Kit Reglazing

A tile repair kit can be used to mix and match colors. White, off white, beige, tan, almond, gray, brown, orange, red, green, blue, black, and more are all match colors. See the kits and swatch. It is possible to modify it yourself. No one needs to hire a spendy expert. The kit takes the expense out of bathtub improvement. It's perfect for people who live in apartment dwellers, commercial or residential tub, sinks, and showers. There are step-by-step videos. There are free videos that show the mystery of reglazing. They show you the way through the application and the finishing steps. If you follow the instructions, you can do it yourself in 2 to 4 hours. The tub and sink remodeling kits include foam roller with covers, material scooper, easy-pouring, and safe-to-use Ekopel 2K enamel. It takes 24 hours to set before you can use your tub or shower. The shortest cure is 72 degrees in the bathroom. It will take longer in lower temperatures. Ekopel's oil-free glaze is eco-friendly and made in the USA. The tub surfaces are restored to a bright gloss with its thick, full-seal coating. Ekopel's oil-free glaze is eco-friendly and made in the USA. The tub surfaces are restored to a bright gloss with its thick, full-seal coating.

Brand: Refinished Bath Solutions

👤Six years ago, we had our harvest gold tub painted by a professional and had problems with chipping paint from the very beginning. I used bathtub refinishing kits from Home Depot to fix the peeling areas. I applied it with a brush and it looked bad, but when the company came, we would sand and paint over the bare spots and hope they wouldn't notice. We decided to replace the tub and tile walls because we were sick of looking at it. The first quote was $5,000. We decided we didn't want the expense and mess of a remodel so I was going to do the work myself. We were sick and tired of it all, so we kept weighing this option against buying another $20 kit and doing another touch up. This is when I discovered the strength of the stuff. We decided to order the kit and try it for the last time before we blew up the bathroom. The first thing to do was to remove the old paint and a lot of it came off with single-edge razor blades. The best way to chisel the blade off was to use a vice grip pliers. I was able to get most of it off in an hour. I had to use a paint stripper in the places where I had touched up the paint with the $20 kits, but that wasn't bad. I used the recommended toilet cleaner to clean the tub. I used my power sander to remove a bit of the shine from the tub after I watched the video and was concerned that the epoxy wouldn't take a bite. I went with it because I had the time and the tools. The paint removal and prep took three hours. The video set provided by Refinished Bath Solutions was very helpful and I watched the application portion at least three times. I followed the method the best I could for a first timer, and it came out very well. I was worried that there wouldn't be enough material to do the job, but I had almost all of the cups left over and I even coated the soap dish. It took about an hour from when I opened the can. The biggest problem was with the drain. The toilet was in the way so I had to scoop the epoxy out. I had to apply my arm on the side of the tub. I would scoop out the material from the drain. The drain cover was removed about 6 hours after I started the application. I messed it up a bit after removing the material from the drain flange with a razor the next morning. Even if you get a cheap pair of knee pads, use them. The paint didn't have any instructions at all. I discovered the Ekopel 2K Technical Data Sheet at the last minute, which contains some important information that wasn't mentioned in the videos. The finish of this product will last me and my wife.

8. 3M Repair Compound Self Adhesive Sanding

3M Repair Compound Self Adhesive Sanding

Behind the wall is a place for flexes and appendages. HOLES are 3 to 5 inches in diameter. Repairs 5X faster. There are damaged areas on walls and ceilings. No cracking, shimmying, or sagging. The interior and exterior are painted. spackling compound is easy to do.

Brand: 3m

👤I was filling in a phone mount. I have no experience with it. I decided to give it a try after looking into these deals and finding this. It worked well. The kit says the surface needs to be dust free. I did what I could but it wasn't perfect. I used a razor to trim the ragged edges. The 3M backpiece held up very well. Since one side of my hole was against a stud, I wanted to shorten the side that was against it. I filled it with the provided substance. This stuff is amazing. I've used basic spackle before and it's much easier to fill a hole with this. The tip of the final pass helped a lot. It took less than a minute to fill the hole. I only used half of the container and had plenty left to fill other holes around the house. It was easy to sand down the next day after it was dry. I didn't care about texture because I was behind the kitchen counter. If you wanted it to match a textured wall, you'd have to get a separate kit. This will be smooth. It took no time at all and I would definitely buy it again. It included everything I needed from the back panel.

👤I thought I'd fill in a hole with a backing and then fill it with wizard talk. It was a crock of poo. The plate fell into the wall after I filled in the hole. One day, a young adventure man or woman will find a young woman who wants to know what 2020 was like. I think I should have put a note on it. I read the directions for 2 days straight, even though the tape didn't stick evenly. What else do I have to do? The compound it comes with is worth the price. I feel like I need to tell you that it's not good for you. It sticks right to the wall because of this. My review is to stick with putting the compound on a sticky mesh from the front.

👤I bought this to fix the holes in the security system. I had a lot of holes to repair. I used wood on the inside to support the sheetrock. I bought this to see if it would be easier. I cut the plastic backing down to fit the holes since they were not as large as the ones addressed in the kit. The tape used on these is not very good. I found that it would not hold. I used double sided tape that is very strong to clean the inside of the hole. I could fill the holes with the special compound supplied because it held the backing plastic in place. That stuff is great. The hole was filled and dried quickly. The repairs look good, painted without any trace of the repair. The product could be improved.

👤I had to patch a hole in a concrete ceiling. I probably should have made a plug out of scrap drywall, but I tried to fill it in slowly. It took way too long to build up and get it wet. The compound in this repair kit has a lot of embedded fibers, which makes it more like clay than regular compound. The plastic backer I used from the kit didn't fit on the metal plate I installed, but it stuck well onto the metal plate I installed. It hardened without cracking or Shrinking. I went over the patch again with regular joint compound to make sure the texture was consistent. I can't figure out where the hole used to be after sanding and painting. It was very easy to use for someone with no experience, and the result was similar to what I would have expected from a contractor. It makes sense for DIYers if the cost is not worth it for real pros.

9. Repair Acrylic Porcelain Fiberglass Countertop

Repair Acrylic Porcelain Fiberglass Countertop

The new and improved bathtub repair kit white has the ability to restore your bath tub. Their tub and shower repair kit can fix every chip, scratch, and dents on your bathtub. Use their tub repair kit to fix cracked ceramic, fiberglass, and porcelain shower sinks. There is a Bathtub Cracked Tile Repair Kit. The fiberglass sink repair is a must-have. The fiberglass tub repair kit saves you money. Their tub repair kit is the best option if you want to fix your bathtub, sink, or tile. The bath repair kit works with any bathtub paint. It has never been easier to get a fiberglass repair kit for a damaged bathtub. The tub and tile refinishing kit gives a high-quality finish. The repair kit works with any bathtub paint. Just use their tub and tile refinishing kit to get your tub and tile back to normal. Their bath tub repair kit is made of porcelain and can be used to treat and restore tiles, bathtubs, and even porcelain countertops. The bath tub repair kit is easy to apply and dries fast. Their tub and tile refinishing kit can be used to restore your bathroom's former glory. Don't wait for the small dents and cracks to get worse. Unlike other tub repair kits, their tub and tile refinishing kit will allow you to fix cracks, holes, chips, and scratches in your sink, shower, and bathtub. Save time, effort, and money when you use their bathtub refinishing kit. The bathtub porcelain repair kit is ideal for tub and tile repairs. Don't wait for the small dents and cracks to get worse. Unlike other tub repair kits, their tub and tile refinishing kit will allow you to fix cracks, holes, chips, and scratches in your sink, shower, and bathtub. Save time, effort, and money when you use their bathtub refinishing kit. The bathtub porcelain repair kit is ideal for tub and tile repairs.

Brand: Fortivo

👤I was impressed by the stellar reviews and thought this would be a great product. I bought a house with a tub. 15 years old with a few dents. The ding bothered me. The product I brought was based on the stellar reviews. We do our own light home repairs. The product was very difficult to work with. The two epoxies are very thick and stick to everything, making it difficult to get a true 50-50 mixture of the two. There are two more The tools provided are ridiculous. The minsicule tool is hard to get into the bowl because it is not heavy. The spatula glides over the mix rather than smoothing it. I think the product is fine for old tubs that are in bad shape, but I wish I had left the small dents alone. There are four The product can't be smoothed or feathered to be thin, I have streaks of it that are unatrractive when trying to smooth out the overage. There are five It is bright white. The tub is old and the mix is brighter and whiter. Anyone can see the repair area. It is possible that this will help to improve old tub and sinks. It is not a good product for small dents. The packaging should be changed by the manufacturer. Instead of small tubs of epoxies that are hard to work with, how about transparent tubes with measuring markers on the tubes? A bowl with more weight and tools that work will cost more to make.

👤I purchased a bathtub with severe damage for $100 at a closeout sale. The tub was damaged in the pictures. I bought this tub to see if I could fix it. I found that there was not much for me to look for. The product looked like it might work. I ordered the product from Amazon to make a short story. The product did an excellent job. The breaks were so severe that I used bondo under the product. I used this product to cure the lower repairs. The product is great and the customer service is great. I asked the customer service line if I could add a second layer. I got an answer very quickly. You can layer the product. I'm going to order another shipment to finish the job. This product is very good.

👤A crack was forming in our daughter's tub. We wanted to see if this product would fill the crack and prevent the water from leaking through. She was very pleased with the results and followed the instructions exactly. It dried very quickly. When smoothing the surface of the sealer, she wanted it to work fast so you don't have to worry about sanding it down. The seal is still holding and the fix is barely noticeable.

👤For the last five years, I have had a small scratch in my bathtub. We were building a house. I am sure someone dropped a tile, but no one was responsible for what happened. It has always bothered me and I am sure that is not surprising. I had trouble cleaning it because it was so deep, as soap scum would collect on the rough edge. I thought about getting it fixed a lot. I was told that it would cost $200 to fix, so I thought about my builder. It could be fixed. I didn't know if it bothered me $200. I thought this product was worth a try, even though I just lived with it. The product comes in two jars. I recommend using something more substantial, since it comes with spoons and scrapers. I broke down and ordered this product, it worked great for the tub, but I didn't really need it on the tiles. The tub was so deep that it took a couple of good applications. If I used this scraper from the beginning, it would only take a couple. I had to layer the product as the first application only partially filled the hole and the goal was to blend and smooth along the edges. This wasn't necessary because the chip in the tile was a surface chip. Pictures of both projects have been included. Even though it may look different on the tub, it is the same surface. I don't have the nasty gash that I have to clean out anymore. I am very happy with the results.

10. Delta RP54870 Renovation Kit Shower

Delta RP54870 Renovation Kit Shower

There is a suit for spa, hot springs and more. This repair parts kit can be used to update your existing tub and shower trim. The replacement kit includes: shower handle, deck plate, screws, cap, sleeve, seats and springs. One of the most popular finishes in the bathroom is chrome, thanks to its stunning gloss and innateVersatility. The shower handle renovation kit is a genuine Delta repair part. The shower handle renovation kit is a genuine Delta repair part.

Brand: Delta Faucet

👤My first product review. I read all the reviews. Looked at a lot of videos. Some comments are here. The flat lever type is what the kit replaced the crystal ball with. The parts fit. You have to be very careful with the old parts. My sleeve and end piece were covered with snow white minerals. I sprayed mine 3-4 times a day. The soaking made it pop right off, even though I was about to cut it off. I bought the "reversing" ball in case. I used the kit's new ball and installed it with the large hole in the instructions. The water was hot on the right and cold on the left. I put the large hole facing up and cured the problem by taking the kits ball. The reversing ball and kits ball were the same, so Delta must have corrected the issue and never told anyone. Why they said there was a large hole down is beyond me. I have to return the ball. The conversion kit has a problem. The difference between hot and cold is about a quarter of an inch. You have to let the water get hot before you move the handle. It can go full on hot in an instant if you go cold to hot. Don't touch the handle in the shower. The updated look of the lever arm is worth the effort. Delta needs to do more engineering on the kits ball to get better H/C water flow. You may have to experiment with your 600. Good luck!

👤A poor effort by Delta. The crystal ball was on the end of the 600 series. The seals were leaking and needed to be rebuilt. The kit will technically work, but you should read possible limitations to your application. 1. The old ball had something inside that it did not. I am assuming this is a flow restrictor as the output at the nozzle is less than before. 2. While getting a new handle is great, it did not have a set screw in it. I found a fine thread set screw in my stash even though it seemed to be unusual. 3. The shower activation shaft has a hole near the bottom. There is a new face plate, but there is no hole in the shower shaft. I had to reuse the old one. The install is new and partially shiny. 4. The packing nut that holds the ball and seals in has no knurl like the last one. You can only use a strap wrench or similar to tighten it all up. It's a cleaner look but it's a bigger pain than the previous design. I had to donate a set screw and new parts to make it work. I have found that companies don't care if a retrofit kit doesn't function completely. I use only Delta in the house and honesty expect a better effort for this amount of money.

👤The Delta Tub/Shower faucets were leaking from the stem. The crystal-style handle was just begging to be updated, and I knew I could just order the guts and replace those to stop the leaking. This kit was perfect for the bill. I searched for "Delta 600 series" on the internet. The first video was uploaded by ramonasplumber and it was very good. Excellent assistance! The biggest challenge of installing this kit is removing the old dome screw cap from behind the handle. If you try to turn it by brute force, you will damage the underlying valve and need a complete valve replacement. I used a rubber mallet and large channel locks. I hit the channel locks with increasing force until they gave way, like an impact wrench, because I had a good hold on the cap. The method I used to rebuild the 2 Delta faucets worked great with some patience. It's easy to do the remaining job once you get the cap off. I learned from the video that the best way to prevent rubber o-rings from swelling is to use silicone plumbing grease. The handle movement was very smooth after the job was done. I was sure I messed up when I installed one of these kits on a faucet. The weight of the handle kept closing the valve on its own after greasing the steel ball. I imagined being in the shower and not being woken up. The pressure fixed the problem after I tured the water back on to the house. No problem! I've prepared several complaints about the valve being opposite in turning on the hot and cold water. I'm not sure what they're talking about as the bottom of the handle points towards the right temperature. Left for hot and right for cold. The instructions for the kit mention that the steel ball should be installed in a certain way to ensure proper operation. The water pressure for each faucet out of the shower head was slightly reduced. I did notice it, but it wasn't enough to bother me. I'm not sure if it has to do with increasing water usage reduction regulations, but I'm not sure if it reduced it enough to make me research it. The high-quality kit gave me a new, updated faucet without having to replace the valve or rip apart the wall. It should be good for another decade or so.

11. Waterproof Porcelain Refinishing Non Toxic Fiberglass

Waterproof Porcelain Refinishing Non Toxic Fiberglass

If you don't like their Tub and Tile Repair Kit, they'll give you a full refund. If you have a problem with it, contact them at any time for help. Tub and tile repair kit. Getting a fiberglass tub refinishing kit for your damaged bathtub has never been easier. Simple operation and perfect results, a solid permanent bonding, saving money and resources. Everyone can do this themselves with only little effort and without having to exchange an already expensive bathtub or damaged one, it's easy to use. The main ingredient is a non-hazardous and odorless epoxide. They can assure you that you will use their products. Multipurpose bathtub porcelain repair kit is perfect for repairing scratches, defects, debris, indoor or outdoor, can be used in aluminum, glass, ceramics, tiles etc. Thoughtful after-sales service. Let Homer is a store that values quality and customer service. If you don't like it, they could replace it and give you a refund. Thoughtful after-sales service. Let Homer is a store that values quality and customer service. If you don't like it, they could replace it and give you a refund.

Brand: Rmolitty

👤All who have cracked-open these cheap white vessels soon whiffed the odorless stench within, but only the Lord knows which entity was summoned from the foul cesspools and polluted vapors seething beneath the allies of Shenzhen to aid in the creation of this putrid sludge. This has become clear: 1. It will never cure or hardened, leaving your tub pocked with soars that will never heal. 2. After days of waiting, the sludge will only grow more fetid and rubbery, and never will it look like the shade of white that was promised. It will emit the unmistakable hue of human bone each day. 3. While generous application of acetone may seem to aid in the removal of the sour demon milk clinging to your basin, there can be no certainty that the infection has been wiped out without a Bishop first exorcising your plumbing system and casting the depraved entity back into the sewers from whence.

👤It was bought to fix a minor fiberglass repair on my boat, not brilliant white or even plain white, more of a slight cream color. My delivery was opened before and there was only one mixing stick. The repair is under the swim ladder so you won't notice the color mismatch.

👤This doesn't come with directions. The directions on the Amazon page don't explain how to clean it up. I wiped the scraper clean so I could use it on a second application. I sanded it down after applying the product. The chip was still visible. See the first picture. I applied a 2nd coat with nothing to lose. The sand paper took the sheen off of the porcelain after it was sanded down. I debated whether to use a product on the chip or replace the sink. I decided to patch the sink until I could make a decision about the whole sink. It would have looked better if it had been more transparent on the first application.

👤The before picture is attached to the one that was fixed, and it is 7 inches long. This did the job, I would recommend it, I didn't sand it, I thought the extra would help support the cracks, I'm more worried about being able to use it than how it looks. Adhered with no problems. I would recommend wearing the gloves. The video is simple to watch and spread. I skipped sand a day later.

👤This product was easy to use. I have an old porcelain tub that has been damaged around the drain area. I used an electric sander and followed the instructions to get it sanded, and it looked like no damage had been done. Highly recommended!

👤The product has no instructions. It would be nice to have a sheet with more information. Is A or B the fixer? Which one is it? If you need to increase the fixer to harden faster, this is important. It took about 1.5 hours to mix. This is a big problem on a wall. I needed to keep moving up. It would be nice to be able to set it in a few minutes.

Summary

What is the best product for bathtub repair kit?

Bathtub repair kit products from Iyax. In this article about bathtub repair kit you can see why people choose the product. Rtg Supply Co. and Danco are also good brands to look for when you are finding bathtub repair kit.

What are the best brands for bathtub repair kit?

Iyax, Rtg Supply Co. and Danco are some of the best brands that chosen by people for bathtub repair kit. Find the detail in this article. Aibast, Realinn and Magicezy are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com