The lightweight is made of high quality steel. The welding systems plastic repair kit will come with a hot stapler gun and a carry case. It is easy to carry. Hot Staple Gun is designed for quick repair and reinforcement of broken plastic on vehicles. A unique stap gun can produce a strong repair. It works by heating special designed staplers and setting them into plastic, which leaves plastic flexible enough for the correct fit. Repairs plastic components such as bumpers, headlight fitting and assembly, panel clips, tabs, plastic pins, spoilers, etc. CSA approved and patent pending are easy to use. CSA approved and patent pending are easy to use.
👤I did a great job repairing the dash of my car. My truck was much worse than the others for cracking in a small area near the passenger airbag. One side of the crack was higher than the other because it was cracked in several places. It looked bad. I used this gun to secure the gaps and added some support with some aluminum sticks. I don't know if it was necessary, but it could not hurt. If I look at the right angle, I can see the crack, but it is barely noticeable. If I had someone do it for me, I would have saved hundreds. The work to get the dash out was difficult, but the tool was easy to use.
👤I bought this tool because I had a huge crack in my bumper and it worked perfectly. It was stapled back together. I used to use plastic welder epoxy which was messy and took 24 hours to dry, but now it's better. I was able to fix a 20 year old machine that had a crack in one of the parts that they don't make anymore, stapler worked great and I was able to fix it in seconds. It fixes cracked plastic by using thin but strong staplers. It's expensive to replace staplers.
👤I've been trying to melt plastic with a soldering iron for a long time. It was possible to sew it with bailing wire. This is a very good solution. The first thing I tried was a cracked snowboard binding. Next up... fixing my dirt bike.
👤The locating tabs were broken and I would have had to replace a $400 headlight. Four clips were needed to fully lock the broken pieces together. I had tried many different types of glue. These worked well.
👤It seems to be well made and not cheap. The amount and variety of staplers are good, but it would be better if they were wider to give more strength to the repair. There is a set of dykes/snips for trimming the staple ends. The gun's heating elements cool quickly. I like to give a small twist before releasing the Trigger. It's a good buy but expensive.
👤I've used this tool many times. The stapled area is not pretty but if you can put them in the plastic where they can't be seen they do a great job. You can follow the examples of uses on YouTube. I don't think you will be disappointed.
👤If you have plastic valuables, this is a great tool to have. I have repaired a lot of things around the house, and even fixed a cracked dash in my car.
👤Works well! The only complaint I have is that the staplers need to be bent to fit into the gun. It's easy to do but takes a lot of time.
👤Does the job. It's a good idea to make such a tool. I used it to fix a plastic boat that I couldn't reach from inside, so it was difficult to push the edge of the staple to avoid sharp objects on the surface. I used extra material to cover the patches.
The gap filling was 0.125 inches. A plastic welder can be used to repair surfaces on a car bumper, kayak or canoe, vehicle dashboard, or even a fuel tank on an ATV. A hot iron welder, a hands-free stand, reinforcing mesh, high-quality plastic rods, and even a wire brush are included in the expanded tool kit package. The plastic welding tool is portable and easy to use, and has 80 watt of power that can heat up quickly to 525F. This plastic welding system can be used with other materials to help expand your repairs or creative projects. Massca Products takes great pride in the quality and reliability of their welding plastic kit, which is why it is backed by their responsiveness customer service and 30-day guarantee. Massca Products takes great pride in the quality and reliability of their welding plastic kit, which is why it is backed by their responsiveness customer service and 30-day guarantee.
👤The kit allowed me to fix the broken plastic on the old scooter. I'm very happy about that. The iron will bend when it is heated within an hour. It will break after a few tries. They give you 2. Unless you look for replacement soldering iron tips, you are done after both breaks. The iron, plastic strips, wire brush and mesh are all good. The only thing that makes this kit special is the soldering tips. I could have gotten everything at either Home Depot or Harbor Freight. I believe that other people have shared the same story. I hope that the seller can influence the manufacturer to find a harder metal.
👤The iron in this kit is large so it is easy to hold onto. It works well for heating up plastic to be welded together. The kit provides enough plastic for most use. It can be used to repair plastic items that have been damaged during use. The main problem with using the kit is that the tips are made from material that is too low a melting point and they start to get hot. The nearly molten shaft bends very easily if pressure is applied to the tip, and no amount of care will prevent this. When I buy a new tip, I add some additional threads to the shaft and install a 1/2-28 nut to prevent premature failures. After the tip is installed, I tighten the nut against the shield on the iron. The pressure on the tip is transmitted to the end of the iron to keep the shaft from getting too hot. I tried to drill out the center of the shaft with a 3/32" drill bit and insert a 3/32" welding rod end into the hole. The molten end can't bend under pressure. When forced into the hole in the shaft, the welding rod will keep it from falling out again. These are used welding rods. I have not tried the extra nut on the new tips yet, but the hollow shaft with welding rod inserted works very well with a 1/4-28 nut holding the two parts together and the shaft installed up to the nut tightly. I was able to complete the job while I waited for the new tips. When the shaft breaks off, the portion of the iron left in it is useless. The easiest way to remove a piece is to drill a 3/32" hole in the end and use a small tool to remove it. The smallest one in the set of four will fit a 3/32" hole and only need to be drilled into the end. A Dremel tool can be used to grind a slot in the tip so that a small flat-blade screw driver can be used to turn the portion of the tip out. The copper is soft and easy to work with. It won't stick to the iron very much. I don't have a better iron. Adding an on/off switch to the power in and a thermal control could make a difference. I turn the iron on by plugging it in and then prepare for the work to be done because it takes awhile for the unit to heat up, but then it overheats, and the tip is almost molten at the point where it exits the barrel. The tip's shaft will eventually break even when you are very careful.
The Valuable set with tools has everything you need to trim your vehicle. The trim removal tool set has 102 useful tools. They are suitable for all models of cars, boats, trucks, working great for audio/radio/stereo system installing or removing, door panel, moldings, emblems, window trims or automotive interior/exterior repairing and furniture restoration. All of the trim tools are made from impact resistant nylon fiber and have a matt surface treatment. The curve is not sharp and is harmless to car paint. The Fastener Remover set includes 2 *fastener removal and 1 clip plier, which is great for many types of clips. Don't worry about missing or damaged body parts again. The trim removal tools come with a bag with a slot for storage. It's convenient to carry with you in your car. It's a good idea to keep your tools well placed during transportation. Customer support is available 24/7. You will always get a 30-day return without reason, a 1-year free replacement and a 24 hour customer support. If you have a problem with the trim puller tools kit, you can contact them. Customer support is available 24/7. You will always get a 30-day return without reason, a 1-year free replacement and a 24 hour customer support. If you have a problem with the trim puller tools kit, you can contact them.
👤The kit gives you several specialty tools for a number of things while you work on cars. The retaining clip puller could cost anywhere from$15-$20, but in this kit you get the puller and a number of pry tool and pullers. I wish I had this when I was younger. I will be pulling my radio from my truck. This kit has enough to get the job done.
👤I have purchased trim kits from Amazon before and they only had plastic pull handles, but they arrived in a small cardboard box. That is not the case with this set. I started a project of running backup cameras on my general truck and realized I would need some additional tools and christmas tree push connectors. When I priced them at the auto parts store, it was going to cost more than the kit. I am very grateful that I bought this kit. It has the usual plastic pry bars, but also the pin release and removal keys. The carry case is where my trim removal takes place. The keeper is named after a back to school supply binder.
👤I was able to access the brakes lights after my entire trunk was destroyed. I decided to look for the right tools instead of using the traditional ones. My mustang will not have her hair cut and she will get new clips. I can get to my project now. The set is made of steel and Ford didn't offer any of the tools to remove or replace any trim when I was there. The quality is outrageously good and the size is much larger than expected.
👤The heat in my truck stopped working. All that was needed was some wire to be adjusted. My brother was willing to fix it, but he needed a tool to do it. The least I could do was give this tool. He popped the dashboard out of place and made the adjustment, and now I have heat! He was happy when I sent the set home, not sure I will ever need it. He likes to work on his cars and has three kids. I'm sure he will bring it back if I need it again. It comes in a nice enclosed case and is easy to locate. I had no idea.
👤We were surprised by the high quality of the kit we received. It was what my son and I needed to replace his factory stereo with an upgrade. The kit is rugged and durable. It was well made. I was worried they might break. I was wrong. The kit has a lot of tools. We didn't get to use all of them, but they will be used when I do some work on my truck. This kit is great for car trim removal. They work. They don't scratch. You can't go wrong with it. The price is a steal for the quantity and quality of the kit. Highly recommend it.
👤I've always wanted a trim removal tool, but never got around to getting one. I went to look for a one that required it. I knew what I wanted to get, a whole case with the complete set, so I just got it. It's much better value than $30. When I got it, I was impressed by the quality and the value it gave me, and I could easily store it away or bring it with me to work on my car, but when I went to do my one job that really mattered, I found that all the tools were nicely packed I discovered that the only tool that works is the best one, and it was the most common one because I only needed to remove the speaker cover from my car. Oh yeah, hahahahaa. Yes. I didn't get to use anything else. I can use most of these tools on the day. They are fun to play with.
The interior trim disassemble tools are molded based on the needs of the market. Being nylon in moderate curve, they won't cause any damages or scratches on the surface unlike metal tools. This is a must-have car tool kit. Their steel plier andfastener removal tools are made of No.65 steel bar and have a tough handle, which makes them strong and durable. It is easy to hold in hand, it is suitable for automotive, boats, RVs, trucks or furniture trim removal and installation, you will feel comfortable to use it even for a long time. Two common fastening tools with different specifications help you to quickly and easily remove staplers, plastic bolts, door panels, dashboard, automotive audio equipment and other upholstery without damaging your car. The upgrade multi-function clip plier is designed to remove bumper clips, plastic rivets, cut wire cables, cold press, remove & tighten the screws, and adopt lever to disassemble door panels. The lifetime after-sale service is enjoyed by all the tools of their company. If you're not completely satisfied with their upholstery combo repair kits, you can return them within 60 days for a full refund. Car trim removal tool kit is a great gift for car lover, maintenance professionals, beginners, and friends on Halloween, Christmas, Thanksgiving, Birthdays, Anniversary Gifts, and more. The lifetime after-sale service is enjoyed by all the tools of their company. If you're not completely satisfied with their upholstery combo repair kits, you can return them within 60 days for a full refund. Car trim removal tool kit is a great gift for car lover, maintenance professionals, beginners, and friends on Halloween, Christmas, Thanksgiving, Birthdays, Anniversary Gifts, and more.
👤I didn't think I'd use the third piece that cuts wires, but I use it for pulling pins as well, because I couldn't get out with the other two pullers. I use them all at work. I had to use the shorter one the next day because I was too short to reach what I needed to remove with it. There were no step ladders for me to use. I didn't have to help remove them because of that one. Over 500 vehicles. It came in handy.
👤I was worried that these would be flimsy and only last for a few jobs. They are well made and I use them for removing bolts from my cars because I am a do-it-yourself type guy with two cars having over 100k miles.
👤The metal is thick. The metal is very thick. I didn't expect that for the price. Look at pictures. These can be used for many different things. The "pliers" tool in other brands looked like they would bend instantly, so I chose this one. I'm buying a second set just in case. The hood insulation was done on the washer fluid lines with the help of the fastener tools. I just bought a second set.
👤If you have hopes of the pliers in the group helping you remove the bolts, forget it. Don't forget that the company can help. They apologized to me when I expressed concern and dissatisfaction.
👤Having the right tool is important when removing push pins on vehicles and recreational vehicles. The tool worked well for me.
👤The pliers have to get under the pin. The pry bar type is better.
👤The product is great for home use. Light professional use. The job is done. It arrived quickly.
👤These worked well and didn't break the clips that were taken off.
👤This item is a good concept and it's also good in application. The tip of the pliers is not as strong as it could be, and the back of the pliers can be sharp, making it difficult to scratch plastic. The other two have fine ends and will remove anything, but they will also leave scratches. I only use one all the time, it's the 22 cm with more angle, it's great for getting into every place. It's easier to remove clips at the angle.
👤Tools for removing trim panel fasteners are Sturdy. I know you can prise them out with screwdrivers, but they could break the trim panel. The tools are used for the job.
👤It's useless for removing rivets because it has a square thick edge to the tool end which should be bevelled to lift the edge of the rivet.
👤The kit is well made and well priced.
A picture frame can be replaced with a glass sheet like the one pictured. A plastic sheet. The best source for plastic sheet. Rule R9 is allowed for use on VEX Robotics competition robots. The safe plastic razor blade scraper is an ideal tool for scrapers. It's a plastic razor blade that is sharp. The design of the plastic prevents you from being hurt by sharp blades. HELEMAN plastic razor blades can do the same job as a steel razor blade without scratching or damaging the surface. The little tool makes cleaning easy. The versatile plastic scraper is made of high quality hot injection molded plastic that provides strength and rigidity. The plastic razor blades sticker removal scraper is very strong. It is resistant to a wide range of chemicals. The package comes with a scraper and razor blades that are replacements for old ones. The ergonomics of the handle design lets you complete the work with a reduced amount of effort. The razor blade holder gives you a bigger edge to grasp. The HELEMAN razor scraper tool is safer for your fingers and finish than the steel blades scraper. 2 slots hold the plastic razor blade firmly. This is a very handy caulk scraper tool that can be carried in a pocket or toolkit. Glue, caulk, labels, decals from counter tops, appliances, metal, glass, and other items are used widely. HELE MAN razor scraper tool kit can be kept in the kitchen, bathroom, workshop, toolbox, office, car, boat, RV, motorcycle. Hileman strive to provide high-quality window scraper with razor blade and excellent service. The 2 pack razor blade scrapers and 100 pack double edge plastic razor blades last a lifetime. If you have a problem with the HELEMAN plastic scraper tool, please contact them. Hileman strive to provide high-quality window scraper with razor blade and excellent service. The 2 pack razor blade scrapers and 100 pack double edge plastic razor blades last a lifetime. If you have a problem with the HELEMAN plastic scraper tool, please contact them.
👤Where have these been all my life? Do not scratch the surface you are working on. I bought to remove the strong glue from my car. A bunch of glue and some babies were used. If you think the blades are getting dull, swap to the other side and throw out. They are worth it. I can think of a lot of other uses around the house for them, such as using on our glass-topped stove, instead of the metal scraper.
👤I am a school teacher and I am going back to school very soon so I bought the Plastic Razor Blade Scraper, 2 Pack Scraper Tool with 100 Pack Plastic Razor Blades Decal Sticker, Easily Remove because I am a school teacher. Posters are put up on my walls with dried hot glue. The scrapers are plastic razors and not sharp, so I can let my students do this job for me. I am very happy with these. One for school and one for home and many blades included to change them. It's a handy item for use in the classroom.
👤My daughter is four years old. She has been sticking them all over the place. On the floor. It's so awesome. I tried using soap and it didn't work. My dad said to remove it. This was a great deal and came with a lot of extrablades. I was amazed at how easy it was to remove the stickers. The plastic ones lift the item up without hurting it, unlike the real blade that could hurt it.
👤This is a great tool. It was ordered to complete a bathtub repair. It worked better than the tools that were provided. It worked well to clean the bathtub when I did the job. The plastic razor blades seem a little smaller than standard size so this tool allows you to get around corners and reach small spaces. I had to swap sides and use a new blade. The set comes with a lot of plates and scrapers so it should last me a while. I plan on using the other one for cleaner applications once I have covered the other one. I need this more than you realize, because it will work great for bathtub soap scum, sticky stuff off of windows or mirrors, and cleaning the cooktop and countertops. We will have a Christmas baking in the near future.
👤I was surprised by this product. I was not expecting it to work so well, but it did. I had a lot of glue on my walls after peeling off 4 pieces of cork board. There are tons of replacement plastic razors so this is a great buy. I used both sides on 2 of the razors in the 3 feet by 3 feet area. I think it sped things up when I did it, but I don't think I had to replace it that often. It broke when I tried to peel off one of the hooks. It did the job it was supposed to do, cleaning my walls, not for something that sturdy and stuck to the wall.
Replacement for a faulty item service. It's much tougher than carbon steel pliers, made of No.65 Manganese Steel bar. The ergonomics design has a Poly Propylene Ethylene (PPE) handle, anti-skid and no grinding to hands, a comfortable handheld for easy removal of plastic bolts, door panels, dashboard and other upholstery. Effective Effort Saving - Adopts a labor-saving lever and spring loaded design of the plier with a long handle, and simply get all stubborn clips removed without damage, a real time and effort saver! The thickness of the plier head is only 1-2mm, which makes it easy to slide into confined areas. It's great for automotive interior and exterior trimming work, but can also be used as a bike tire removal and pushpin puller, and a canvas bag for easy storage. It's great for automotive interior and exterior trimming work, but can also be used as a bike tire removal and pushpin puller, and a canvas bag for easy storage.
👤Disappointed. Great idea, but really bad materials. Lasted a week. Pulling plastic clips can cause stress in the metal.
👤I have heard good things about this tool. This one is terrible. The pliers completely bent out of place when I removed the second clip from my bumper. Very disappointed.
👤The push pin removal kit came in really handy when I had to remove the push pins from my Suburban. I could reuse the push pins again, instead of messing the head up and having to use a new one if removed with a screw driver, because I came in a great high quality red canvas bag.
👤The product broke on its first use. The pry bars are nice, but the pliers broke the first time I used them.
👤The price was much better than I expected. The metal bar stock is strong. I bought this set to help me remove the inner fender lining of the Accord to replace the head light bulbs. I used each tool in the set for its purpose and removed the clips without damaging them. I recommend this set.
👤The design is sturdy, but it's too thick for removing plastic clips, so I used a plain flat-tip screw driver. I had to wrap the plier with electric tape to make sure it wouldn't scratch paint. I would go for a strong plastic removal if I could find one that was strong and sturdy.
👤I finally caved in and bought the removal tools after 5 decades of fiddling with cars. It would have made my life a little easier if I had saved some of the damage for reuse. I was terrified of the clip fastening removal process until I got this.
👤I decided to send these back after reading some reviews about quality issues. I have a pair of inverse pliers, but they are limited in what they can do. I wanted something with a head configuration that could be interesting. I used them to help remove small lines that are over 20 years old. These pliers were stressed to their max by me. I bench tested the pry bars and they held up to a lot of pressure. The tool box has a welcome addition of keepers.
👤Para quitar las grapas y tolvas.
👤I watched a video on how to change my headlights. It looks like it could last forever.
👤The cheap pry bars will be used to make my own in the future, but the pliers are awesome.
👤Las herramientas son funcionales y apropiadas.
All trim removal tools from their company have a lifetime of service. If you're not completely satisfied with their upholstery combo repair kits, you can return them within 60 days for a full refund. The KITBEST auto trim removal tool is great for automotive exterior and interior trim removal and furniture restoration, including wheel hubs, door panels, moldings, window trims, clips, fasteners, dashboards, emblems, panels, audios and radio system without any scratching or damaging your car. The KITBEST auto trim removal tool kit has 11 specific tools that make removing trim easy. You can make repairs and maintenance on your own. The nylon fiber material used in the auto trim removal tool kit is strong enough to hold up panels and pop open pins. KITBEST trim removal tools are impact resistant, eco-friendly, non-toxic, and softer on the surface than a nylon car tool set. The KITBEST auto interior trim removal tool is easy to use and hold in hand. It's a great tool for beginners and professionals. Save your money and time. The interior trim disassemble tools are molded based on the needs of the market. Being nylon in moderate curve, they won't cause any damages or scratches on the surface unlike metal tools. This is a must-have car tool kit. The interior trim disassemble tools are molded based on the needs of the market. Being nylon in moderate curve, they won't cause any damages or scratches on the surface unlike metal tools. This is a must-have car tool kit.
👤These tools are thick. The points and edges are hard to get into console trim to remove stereos, door panels, or replace a broken mirror. The thick plastic is so thick that it can cause scratches on painted surfaces. There is no storage pouch included. I thought there would be many other trim kits when I read "Nylon Auto Toolkit". They do not make good back scratchers.
👤I used this set to remove the rear air conditioner vent assembly from my wife's car. Had I owned window regulators at the time, this work would have saved me a lot of headaches. I need to have tools that will not mar your plastic interior bits.
👤One of the tools broke on the first day as I took down the panels in my van. There is a lot of flex when trying to pry panels off of them. I ended up using the one metal tool most of the time, which causes me to scratch my paint a little.
👤I was worried that the tools would be flimsy and cheap. I don't expect them to last for long because I use them almost daily, but they are holding up well so far. The shapes and sizes are good for getting the job done and the material used to make them is good for their purpose.
👤This is a must have for many types of projects. I wanted to replace the back-up camera on my Honda Accord. The chrome strip on the trunk lid had to be removed. The tools made the job simpler.
👤I haven't used them yet, so I can't comment effectively, the package is nice, I love the color blue, and they have the angles and slots in all the right places. Thanks for the effort.
👤Getting plastic panels apart is easier with the right tools. As far as strength and resilience are concerned, only time will tell as I continue to use these.
👤The products are advertised. There are twelve different tools. The auto windshield trim replacement was delivered in time. There was a plastic tool that prevented damage to the paint. Good purchase.
👤This888-607-888-607-3166888-607-888-607-888-607-888-607-888-607-3166 has already become invaluable after only a few weeks. The plastic is very strong and can remove any trim. I have done a lot of work on my car since buying it from removing the dash and center consoles, and the extra tool for removing retaining clips with out damage is fantastic. 5 stars all the way.
👤Everything you need to get the panels off your car is fantastic.
👤I liked the feel of the tools, but disliked the packaging, it was to remove panels on the interior of the car to install a dash cam.
👤I did exactly what I wanted.
The 50w plastic welder is suitable for repairing and reinforcing plastic parts of automobiles, such as bumper,dashboard, light brackets, plastic ring and plastic articles in daily life. This hot stapler bumper repair kit is easy to use and it has a strong durable and flexible force in few minutes. It was quick and easy. The plastic bumper repair kit is comfortable to use. It was designed to fit into your hand. Most modern products are made of plastic. You can see the cracked part of the bumper with light. The hot stapler plastic repair kit is safe to use. The plastic stapler will stop working if the transformer temperature goes up to 65C. The lightweight is made of high quality steel. The welding systems plastic repair kit will come with a hot stapler gun and a carry case. It is easy to carry. The lightweight is made of high quality steel. The welding systems plastic repair kit will come with a hot stapler gun and a carry case. It is easy to carry.
👤I picked up a vehicle. It was in good shape for its age, but the plastic fender were cracked. I wanted to fix them before they got worse. If the tool didn't work, I would get a regular plastic welder. This worked well to repair the fender. The first picture is a before picture. Picture 2 and 5 are not finished. The back side of the repair is shown in picture 4. I used a lot of the staplers to hold it together. One of the staplers is glowing red. I was surprised that the probes don't get hot. The staple will glow if you push the button. Press it half way through the plastic and then twist it to lock the staple under the plastic. Make sure you hold the tool for a few seconds after you release it so it doesn't pull the staple out. There are some negatives to the tool. The first thing is the cutter. They are useless. Throw them away. The case is second. The case to hold the staplers is molded in place because the hinges pull apart too easily. I don't think many will use the inside and outside corner staplers for repairs. There should be more of the S shaped staplers.
👤I've been trying to repair a few different parts using different types of glue, glue, and other materials but they seem to build up thickness making it hard for the part to fit properly. This was easy and I could hold the pieces together in a few seconds. I added a coat of flex seal to it after I had finished dipping it. I don't have to spend $50 for a used part that is not manufactured anymore and would break in a couple years, it looks and feels like new.
👤If you have something thin, it won't work in plastic surfaces that aren't thick enough, and the metal joint part will go directly to the other side.
👤Works well. The HD wheelbarrow I use to haul fire wood was cracked and rubbed the tires. I set the staple and it has held up. I wish I'd gone from the bottom, but it still works great. Very happy with it.
👤I've repaired a number of plastic items that were broken or cracked. An old Mega dustpan had cracks, and was easy to repair, but a magnet sweeper that rolls to pick up nails broke at the joint with the handle. Isn't the idea of recycling that plastic recycling bin gets a few more years? Plastic is prone to crack as it gets older. The device makes it easy to repair and reinforce those spots.
👤I would have had one a long time ago. A cracked fan shroud was fixed on a truck. I had to contort myself to get it to the right place. I did manage. It would be perfect if it had heating elements that you could change out from the gun. It is highly recommended.
👤I broke my head when I fell. This is a structural repair because the head holds the heavy 40v battery. I embedded a dozen wiggly staplers in the gun to make it stronger than the original design. I think so. I can't wait for something else to happen.
Don't take their word for it, if you are not 100% satisfied, they will give you a full refund. They are professionals. They're enthusiasts! They have spent years developing their professional automotive detailing products. They use them. Their friends use them. They will give you a full refund if you are not completely satisfied with their products. Send them a message. The kit has five different kinds of trimming tools, which are excellent for trimming car audio/radio, door panel, window, interior accessories or even for bicycle tire removing. The auto panel tool set is lightweight and easy to hold, which will save effort and improve trimming efficiency. These clips are made to be gentle on surfaces unlike metal clips that cause scratch on surface, so you don't have to worry about damaging your paint finish. The auto removal tool set is designed for all models of cars, boats, and trimming jobs with a variety of shapes and sizes. There are different sizes for the plastic panel removal tool. There are different sizes for the plastic panel removal tool.
👤Some reviews have complaints about these being soft. If used properly, my experience is not at all. I guess. If you're working with a harder surface that makes sense, but these aren't designed to take apart book shelves and open your car door when you lock your keys in there. They can be used to install a stereo or swap out a battery in a car. These work well for those types of applications. They would damage your project if they were ridged. The flex are made of plastic. The first step is to expect limitations. You're learning how to save money and be happy about it. Before writing a bad review, you should learn what a tool is for and how to use it. Who cares how long these will last? If you saved $10 or more, you've already won.
👤One of the tools was used to remove the plastic cover. It snapped off. The second tool bent. It snapped off when it was used on the other side. What a joke. I wasn't applying heavy pressure. Don't waste money or time. I pulled out a pocket knife that worked well.
👤They worked for what I needed, but they were too bendy. It was easier to take off the panels after doing it once already, but it was hard to do because the tools couldn't handle it. The biggest tool was not enough to take off the door panels. I am pretty happy with them and they worked. I didn't have to use them a lot but they have been good for me.
👤I replaced some speakers in my car with these. I was able to do the job, but I wish there was at least one smaller tool in this set. If you're using this tool for the first time, take your time and remember that you'll need to use two tools - one to pry a little at first and the other to slide into the gap created by the first one.
👤The price seemed fair, I had to replace my radio. The replacement cost is $1800.00 plus labor. ! I installed myself after finding part $480.00. Homerun. Works well. I'm a hero saving dough. There is a I learned how the auto was assembled. Good value and good outcome!
👤It works for me to remove the panel pins in my van. The plastic tools don't mark pins or panels. There is a It seems like it would break with daily use. This is hard to beat for my occasional use and price.
👤Some panels were removed a couple times and they are holding up, but not used much yet, so don't know how long they'll last.
👤One of the tools was used as intended. I stopped using plastic when it began to turn white. I tried to use another tool to pop the Honda plastic rivet. Didn't fit in. The old metal tool was used to do the job. These aren't strong enough to remove plastic clips.
Hileman strive to provide high-quality window scraper with razor blade and excellent service. The 2 pack razor blade scrapers and 100 pack double edge plastic razor blades last a lifetime. If you have a problem with the HELEMAN plastic scraper tool, please contact them. Universal auto trim removal tools. The high quality terminal removal tool kit is suitable for automotive, boats, RVs, trucks or furniture trim removal and installation, including: car audio/radio, door panels, window trims, clips, fasteners, automotive interior repairing and furniture restoration. There are 8 different kinds of balms that meet your needs. Push retainer pin kit with 8 kinds of common style made of impact-resistant nylon fiber material with matt surface treatment, which would not break or crack easily during use, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, There are audible clefts for cars. The cable clip organizers helps you organize the cable of the car. As you like to use them, they are self-adhesive and easy to use. It is made of sturdy and durable nylon material and has a unique ergonomics design which can easily hold the tool, great for effectively saving workload and time when performing tedious repairs or maintenance tasks. 40 x Car Retainer Clips,4 x Precision Hook Picks,6 x Stereo removal Tools,10 x Adhesive Cable Clips,12 x Car Trim removal are included in the automative TRIM REMOVAL TOOLS KIT. Tools, 1 x Trim Clip removal pliers, 2 x U-Shaped removal tools, 2 x Upholstery Fastener removal, 11x auto terminal removal key tool. BYNIIUR has a 12-month support for faulty item service. 40 x Car Retainer Clips,4 x Precision Hook Picks,6 x Stereo removal Tools,10 x Adhesive Cable Clips,12 x Car Trim removal are included in the automative TRIM REMOVAL TOOLS KIT. Tools, 1 x Trim Clip removal pliers, 2 x U-Shaped removal tools, 2 x Upholstery Fastener removal, 11x auto terminal removal key tool. BYNIIUR has a 12-month support for faulty item service.
👤You don't get pro-quality tools in this set, but who cares? It is hard to beat the price. The plastic tools will not mar your vehicle if you trim the edges with a knife. If you don't modify your squeeze, the Xmas tree extractor will send your fittings into low earth. It was a good idea to disassemble the parts of my 1979 amc spirit after I brought my friends back from comic con dragon quest. Wallace drank a 24 pack of Red Bull and ate all our Cheetos, and when Poindexter saw a Wonder Woman cosplayer experience a costume malfunction and expose her chesticles, he leaned onto Wallace's 78 inch waist to yell out the window to the Wonder Woman. We tried to tell poindexter that the cosplayer was likely a paid model, but he didn't listen. Wallace vomited and coat the rear seat, carpeting, doors, and other parts of the building with a foul mixture of Red Bull, orange 'Cheeze', and 3 or 4 pizzas he had eaten earlier in the day. Poindexter continued to shout his love and requests forrope play to the cosplayer, who by this time was laughing so hard her pasties fell off, drawing a larger crowd. By the time sanity was restored, mostly by the cosplayer shouting in a heroic manner that the next mo-fo who takes a picture of my boobs is gonna pay me $50 or my manager is gonna break their knee caps, and by rolling up the rear window so Poindexter could After a long ride home, stopping only for gas, and every half an hour to get sustenance at the Golden Arches, we attempted to clean the car and Wallace at a car wash. The high power pressure wash did a good job of removing the emesis, but it did not remove the accumulated gunk from parts of Wallace's body that he could not reach for at least a decade. The poor NCC-1701AMC was not so lucky. We decided to order this set of tools and use them to disassemble the interior of our car after spending hours of research and watching videos. It worked well, and it also found a package of prophylactics from 1984 that I had to start sharing with a member of the opposite sex because I was too rich and rewarding to share with them. Thank you, autoxel!
👤If you email them a picture of your review, they will give you a $10 Amazon gift card. I sent in a picture of my review. They didn't send me a gift card. I'm pretty sure I would have gotten the gift card for a 5 star review. They did not follow through on sending my gift card, so I am lowering my review to 1 star. The plastic tools I reviewed are of a plastic that is rigid but doesn't crack or break, like a plastic comb. One of the metal tools worked well for me. I can't say anything about the other tools. The set was changed because of the case. I buy things with a case in order to keep the tools organized. The layout of the elastic loops makes it hard for many tools to get out and it makes it hard for others to share elastic loops with other tools. Too many and too few elastic loops. Other items and tools don't have an elastic loop at all. The case was made for something else and they jammed the tools into it. The selection of tools is too many. I don't need all the tools for two or three of the shapes. I would have liked less tools with a more functional case. I would buy a different kit if I had to do it again. The tools were good, but the rating was three stars.
The package includes: 40PCS Fastener Rivet Clips. There are 5 different kinds of trim tools, including a car door panel removal tool and a fastening tool, which will save you time and money. Premium grade NYLON. The tool set made of impacted resistant nylon fiber is non-toxic and eco-friendly. The ergonomics design of GOOACC trim removal tool kit is lightweight and easy to use, which effectively saves effort for various interior and exterior car trimming. It's great for installing or removing car audio/radio system, door panel, emblems, window trims or automotive interior repairing and furniture restoration. 100% SATISFACTION GUARANTEED: If you have a question, please contact their customer service. 100% SATISFACTION GUARANTEED: If you have a question, please contact their customer service.
👤I didn't think they would hold up. I was proven wrong. I wanted to install an aftermarket radio in my car. They helped get the job done without tearing up my interior. They are strong. I put a lot of force on them and they were taking it. I'm very impressed. It is worth the money. Do not do any interior work without these. You will be sorry when you scratch up the expensive plastic in the car. Even if you don't need it immediately, this is the type of tool you should buy. When things go wrong, you'll be tempted to use other tools, like a screw driver, that are readily available. You will be sorry. It's not the right tool for the job if you put tape on the end. You have to be careless to damage the interior.
👤The pry clip was stuck in my bumper and the tools broke trying to remove it. I was hoping the only tool that could pry it was a metal one. You get what you pay for, but I can't fault the other pieces they worked on. Even the most skilled one didn't stand to complete the job, so they'll buy a tool that costs more and hope it will do it.
👤I bought this set of tools to install a new stereo and speakers in our minivan. I have done similar work in the past but never with this type of tool. I would love to go back in time and buy the tools. I would have saved a lot of time. These are sturdy and do a great job. I was trying to decide between this set and others. I don't remember why I was having a hard time deciding, but now that I've used these, I would get this set again. No regrets!
👤I've been working with car interiors for years, but never spent the money to get a kit like this. I realized I should have done it a long time ago after purchasing this one. The plastic material prevents scratches, unlike a flathead screwdriver, and the assorent of tools makes it useful for a number of different panels/connectors. They may not be the most durable. I snapped the end of one of the picks. It's worth it for the price. Highly recommended.
👤The plastic pieces are made of weak plastic. I was trying to pry the back of the Macbook from it's cradle. If only one item is useful, what is the use of buying a set? Get something else and save yourself money.
👤Like the variety. I had to take the door panel off of my X5 to see what was wrong with the window, and instead of using a screwdriver to risk any scratches on the panel or the paint, this set was right on. Thanks to the pronged one that pulled up the screws. Attempted to do it without this tool.
👤I was not expecting much for the money, but it is a nice kit. I had to hide the wires. I was concerned that the kit would not hold up for more than one install. Good news, everything worked out for all three. If I ever need the tools again, they are undamaged and ready to go. It's worth the money and should work for the amateur. I don't think they will last as long as a pro set.
Repair plastic tool products from Astro Pneumatic Tool. In this article about repair plastic tool you can see why people choose the product. Massca and Dualeco are also good brands to look for when you are finding repair plastic tool.
Astro Pneumatic Tool, Massca and Dualeco are some of the best brands that chosen by people for repair plastic tool. Find the detail in this article. Wetado, Heleman and Gooacc are also brands that their products are worth to check.